window.dataLayer = window.dataLayer || []; function gtag(){dataLayer.push(arguments);} gtag('js', new Date()); gtag('config', 'UA-69850352-1');

Resimetal 103 Metal Repair Stick is a two component repair material in stick form which cures rapidly at room temperature after mixing. It is a metal repair adhesive which develops high mechanical strength in a short period of time.
• Apply to hand prepared or mechanically cleaned surfaces
• Rapid curing – hard dry in 30mins

15,13134,44 TTC  

Clear

Description

103 Metal Repair Stick

SA single component repair putty in stick form which cures rapidly at room temperature after mixing. It is a metal repair adhesive which develops mechanical strength in a short period of time and can be used for emergency repairs
– Leaking pipes
​- Holed pump/ valve casings
– Leaking tank seams
– Pipe flanges

Surface Preparation

Metallic Substrates – Hand tools
1. All oil and grease must be removed from the surface using an appropriate cleaner such as MEK.
2. All surfaces must be cleaned using wire brush, metal file, coarse sandpaper etc.
3. Once abraded, the surface must be degreased and cleaned using MEK or similar type material.

Metallic Substrates – Mechanical tools
1. All oil and grease must be removed from the surface using an appropriate cleaner such as MEK.
2. All surfaces must be mechanically abraded using handheld grinders to ISO 8501/4 ST3 (SSPC SP3 ST3).
3. Once abraded, the surface must be degreased and cleaned using MEK or similar type material.
4. All surfaces must be coated before gingering or oxidation occurs.

Mixing and Application

Prior to mixing please ensure the following:
1. The ambient & surface temperature is above 5°C (41F°).
2. The product is supplied in stick form and therefore the base and activator component are premeasured.
3. Simply break off the required amount of material from the stick and using gloved hands knead the product until the
black and grey components become a consistent mid grey.
4. The product once fully mixed has a usable life of 3-5mins at 20°C (68F°).
5. Once a consistent mix has been achieved apply the material by pressing the putty onto the prepared surface.

Cure Times

At 20°C (68F°) the applied materials should be allowed to harden for the times indicated below before being subjected to
the conditions indicated. These times will be extended at lower temperatures and reduced at higher temperatures:
Usable Life 5 mins
Machining and light loading 30 mins
Full cure 1 hour

Colour

Mixed material – Mid grey
Base component – dark grey
Activator component – Light grey

 

Technical Sheet

https://www.resimacsolutions.com/uploads/4/5/0/7/45072315/103_metstick_tds.rv3.08052019.pdf

 

Product Specifications

https://www.resimacsolutions.com/uploads/4/5/0/7/45072315/103_ps.rv3.13052019.pdf

 

Application Guide

https://www.resimacsolutions.com/uploads/4/5/0/7/45072315/103_qag.rv2.10052019.pdf

Delivery

Your orders are processed and shipped within 2 to 3 working days (valid for products available to Belgium, France, the Netherlands, Germany and Luxembourg). Shipping costs for quantities of + 40kg outside Belgium must be calculated on a custom basis and will not be included in your order. You live in another country or you want to order more than 40kg to France, the Netherlands, Germany or Luxembourg? Contact us for a personal quote!

 

More info

Do you have a specific product, a packaging that you cannot find on our website or a question about your project? Do not hesitate to contact us or to come to our shop in order to access our complete range and to benefit from our personalized advice. We will be happy to help you!

Contact us

Go to Top