window.dataLayer = window.dataLayer || []; function gtag(){dataLayer.push(arguments);} gtag('js', new Date()); gtag('config', 'UA-69850352-1');

Resimetal 106 Metal Repair Paste XF is a fast curing two component solvent free epoxy metal repair compound. The product has been designed for use on a wide range of metallic surfaces and once cured is readily machineable.

99,22161,54 TTC  

Clear

Description

106 Metal Repair paste XF (kit)

A 2 component fast curing solvent free epoxy repair compound. The material can be used to make fast and effective repairs to metallic, GRP & plastic surfaces.
106 Metal Repair Paste XF can be applied to manual or mechanically prepared surfaces and will be hard dry within 45 minutes.

Indications :

  • Leaking pipe joints
  • Leaking tank seams
  • Holed pump or valve casings
  • Leaking flange fittings
  • Platebonding
  • Resurfacing of corroded steel plates

Surfaces preparation

Metallic Substrates – Hand tools
1. All oil and grease must be removed from the surface using an appropriate cleaner such as MEK.
2. All surfaces must be cleaned using wire brush, metal file, coarse sandpaper etc.
3. Once abraded, the surface must be degreased and cleaned using MEK or similar type material.
Metallic Substrates – Mechanical tools
1. All oil and grease must be removed from the surface using an appropriate cleaner such as MEK.
2. All surfaces must be mechanically abraded using handheld grinders to ISO 8501/4 ST3 (SSPC SP3 ST3).
3. Once abraded, the surface must be degreased and cleaned using MEK or similar type material.
4. All surfaces must be coated before gingering or oxidation occurs

Mixing

Prior to mixing please ensure the following:
1. The base component is at a temperature between 15-25°C.
2. The ambient & surface temperature is above 5°C.

Once these 2 checks have been met, please proceed with mixing the product.
If part mixing the unit of material please follow the instructions below:
1. Using the spatula provided place 1 equal measure from the base & activator units onto the mixing board provided.
2. Ensure to clean the spatula thoroughly after measuring the base component and before measuring the activator
component.
3. Mix the 2 components together until you have a streak free mix (mid grey) on the mixing board.
4. Ensure there is no unmixed material on the spatula or mixing board.
5. From the commencement of mixing, the material should be used within 5 minutes at 20°C.

Application

1. Using a spatula or applicator tool, apply the material to the prepared surface.
2. Ensure the product is pressed into any holes, scars or cracks.
3. Once the repair has been completed smooth off any imperfections using a gloved hand.

Cure times

At 20°C the applied materials should be allowed to harden for the times indicated below before being subjected to the conditions indicated. These times will be extended at lower temperatures and reduced at higher temperatures:
Usable life 5mins
Hard dry/ machining 45mins
Full cure 4 hours

Color

Mixed material – Mid grey
Base component – Black
Activator component – White

Temps de recouvrement

Minimum – the applied material can be over-coated as soon as it is touch dry.
Maximum – the over-coating time should not exceed 4 hours.
Where the maximum over-coating time is exceeded, the material should be allowed to harden before being abraded to remove surface contamination.

Storage life

5 years if unopened and store in normal dry conditions (15-30°C/ 60-86°F)

Technical sheet

https://www.resimacsolutions.com/uploads/4/5/0/7/45072315/106_metpastexf_tds.rv3.08052019.pdf

Product specification

https://www.resimacsolutions.com/uploads/4/5/0/7/45072315/106_ps.rv4.29112019.pdf

Delivery

Your orders are processed and shipped within 2 to 3 working days (valid for products available to Belgium, France, the Netherlands, Germany and Luxembourg). Shipping costs for quantities of + 40kg outside Belgium must be calculated on a custom basis and will not be included in your order. You live in another country or you want to order more than 40kg to France, the Netherlands, Germany or Luxembourg? Contact us for a personal quote!

 

More info

Do you have a specific product, a packaging that you cannot find on our website or a question about your project? Do not hesitate to contact us or to come to our shop in order to access our complete range and to benefit from our personalized advice. We will be happy to help you!

Contact us

Go to Top