{"id":13785,"date":"2024-03-25T09:23:55","date_gmt":"2024-03-25T08:23:55","guid":{"rendered":"https:\/\/www.finres-sa.com\/?post_type=product&p=13785"},"modified":"2026-04-28T16:39:30","modified_gmt":"2026-04-28T14:39:30","slug":"jesmonite-ac100-kit-copie","status":"publish","type":"product","link":"https:\/\/www.finres-sa.com\/en\/product\/jesmonite-ac100-kit-copie\/","title":{"rendered":"AS20 TRANSLUCENT POLYADDITION SILICONE – High Resistance, Flexible, Superior Quality"},"content":{"rendered":"\t\t
\n\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

AS 20 is a translucent addition-crosslinking silicone rubber. Addition polymerization systems are of the highest quality. They offer excellent dimensional stability, low shrinkage and higher chemical resistance. <\/span><\/p>

The choice of a polyaddition silicone is particularly recommended when the mold needs to withstand more than a hundred print runs.<\/span><\/p>

Its high elasticity and mechanical strength make it particularly suitable for industrial-grade molds.<\/span><\/p>

This silicone consists of 2 parts, its base is non-toxic and mixes easily with the corresponding catalyst in a 1:1 mixing ratio.<\/span><\/p>

Its shore A of 20 gives it an appreciable flexibility that will facilitate the demolding operation.<\/span><\/p>

This silicone can be used to make molds for casting polyester resin, epoxy, polyurethane, plaster, wax, etc., and low-melting metals.<\/span><\/p>

Their high resistance to alkaline constituents also makes them suitable for concrete casting. <\/span><\/p>

AS 20 hardens at room temperature; the higher the room temperature, the faster the setting time.<\/span><\/p>

All our silicones in the “AS” range can be thickened by adding our THIXO silicone polyaddition. The resulting paste texture can be applied to vertical elements with a spatula. <\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t\t
\n\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Specifications<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t
\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Mixing ratio (shore A): 20<\/span><\/p>

Color: translucent<\/span><\/p>

Pot life at 25\u00b0C: 25-30′.<\/span><\/p>

Curing time: 4-6h<\/span><\/p>

Viscosity (mPa.s): 3000 \u00b1 1000<\/span><\/p>

Density (g\/cm\u00b3): 0.98<\/span><\/p>

Tensile strength (MPa): 5.0 \u00b1 0.3<\/span><\/p>

Tear strength (N\/mm): 22\u00b12<\/span><\/p>

Elasticity (%): 480<\/span><\/p>

Contraction (%): <0.1<\/span><\/p>

Storage: Store in a cool, dry, well-ventilated place.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Application Instructions<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

In a clean, dry container, weigh out the quantity of silicone required and calculate a 1:1 addition of catalyst (e.g.: 100gr base + 100gr catalyst).<\/span><\/p>

<\/span><\/p>

Using a spatula, thoroughly mix the two components until a homogeneous paste is obtained; using a mechanical mixer, keep at low speed (300 to 500 rpm) for 2 to 3 min. and keep the mixer head in the silicone to limit the incorporation of air bubbles. <\/span><\/p>

<\/span><\/p>

After checking that the formwork is watertight, pour the silicone mixture onto the model to be reproduced.<\/span><\/p>

Aim for the lowest point and pour the silicone in a thin vein.<\/span><\/p>

The first coat can be applied directly with a brush, followed by filling.<\/span> then fill.<\/span><\/span><\/p>

Vacuum preparation is possible at a pressure of 0.85 bar for a maximum of 3 ‘.<\/span><\/p>

<\/span><\/p>

Demoulding can take place after +\/- 6h of hardening at room temperature. The longer you wait before unmolding, the more time the silicone will have had to reach optimum mechanical properties. In the case of a low-melting metal casting, post-firing is recommended. <\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t

\n\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Safety<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Wash your hands and other exposed areas with mild soap and water before eating, drinking or smoking, and when you leave work.<\/span><\/p>

Safety data sheets available on request.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

AS 20 is a translucent addition-curing silicone. This silicone is highly accurate in its reproduction of detail. Its beautiful elasticity and incredibly fast setting make it a wonderful silicone to work with. <\/span><\/p>\n","protected":false},"featured_media":16317,"template":"","meta":[],"product_brand":[],"product_cat":[1002,1491,1721],"product_tag":[420,424,537,427,359,361,538,391,428,429,396],"class_list":{"0":"post-13785","1":"product","2":"type-product","3":"status-publish","4":"has-post-thumbnail","6":"product_cat-news","7":"product_cat-silicone-molding","8":"product_cat-silicone-platinum-polyaddition-en","9":"product_tag-decoration","10":"product_tag-ecofriendly-en","11":"product_tag-finesse-en","12":"product_tag-jesmonite-en","13":"product_tag-kit-en","14":"product_tag-molding","15":"product_tag-on-sale-en","16":"product_tag-rigid","17":"product_tag-sculpture-en","18":"product_tag-show","19":"product_tag-stratification-en","21":"first","22":"instock","23":"sale","24":"taxable","25":"shipping-taxable","26":"purchasable","27":"product-type-variable"},"_links":{"self":[{"href":"https:\/\/www.finres-sa.com\/en\/wp-json\/wp\/v2\/product\/13785","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.finres-sa.com\/en\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.finres-sa.com\/en\/wp-json\/wp\/v2\/types\/product"}],"version-history":[{"count":2,"href":"https:\/\/www.finres-sa.com\/en\/wp-json\/wp\/v2\/product\/13785\/revisions"}],"predecessor-version":[{"id":39464,"href":"https:\/\/www.finres-sa.com\/en\/wp-json\/wp\/v2\/product\/13785\/revisions\/39464"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.finres-sa.com\/en\/wp-json\/wp\/v2\/media\/16317"}],"wp:attachment":[{"href":"https:\/\/www.finres-sa.com\/en\/wp-json\/wp\/v2\/media?parent=13785"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/www.finres-sa.com\/en\/wp-json\/wp\/v2\/product_brand?post=13785"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/www.finres-sa.com\/en\/wp-json\/wp\/v2\/product_cat?post=13785"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/www.finres-sa.com\/en\/wp-json\/wp\/v2\/product_tag?post=13785"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}