Polycondensation moulding silicone.
A new generation of polycondensation moulding silicone.
Exceptional tear resistance, blue catalyst (mix control). Hardness 3 shore A but can be mixed with MM922 to increase its hardness.
High undercut, very thin or brittle mould making
Medium dimensional stability and cures at room temperature within 24 hours.
White in colour, this silicone is highly resistant to abrasion and tearing and is ideal for making small moulds and casting small series.
Small size moulding
Casting of small series
Mixing ratio: 5% (ex: 100g base + 5g catalyst)
Demoulding: minimum 24h (ideally > 72h)
Hardness 3 shore A
Relative density at 25°c: 1,21
Linear shrinkage %: 0,5
Peak temperature °c: 180
Storage: minimum 5° – maximum 32°c
Storage: 6 months in closed packaging