Resimetal 108 pipe repair tape is a high-performance, fast-curing moisture-activated repair tape, specifically developed for the repair of leaking pipes, which is activated by immersion in water.
– Apply to hand-prepared or mechanically cleaned surfaces.
– Fast curing – fully cured in 30 minutes.
– Pressure resistance from 72.5psi to 218psi
ALL PRESSURE MUST BE REMOVED FROM THE PIPE BEFORE ANY WORK IS CARRIED OUT.
At 20°C (68F°), applied materials must be allowed to harden for the times indicated below before being subjected to the conditions indicated.
conditions indicated. These times will be extended at lower temperatures and reduced at higher temperatures:
Service life 3 mins
Full cure 30 minutes
Minimum – the applied material can be covered as soon as it is dry to the touch.
Maximum – covering time must not exceed 1 hour.
Once the maximum recovery time has been exceeded, allow the material to harden before sanding to remove surface contamination.
to remove surface contamination.
Mixed material – White
1 year if unopened and stored under normal dry conditions (15-30°C).