Google score of 4.8
(27 reviews)
Free delivery in Benelux up to 10kg.
Jesmonite® is a water-based synthetic resin composed of acrylic polymers and minerals.
This system is suitable for a wide range of cast and laminate applications, and the different ranges allow you to achieve stunning results with a multitude of finishes, from a metallic or granular stone effect to marble and terrazzo in an unlimited number of colours.
A range of ancillary products is also available to increase the versatility of the materials.
Jesmonite AC100 is suitable for both internal and external use, however, if used externally, a suitable paint, varnish or sealer system is recommended to protect the surface appearance.
Packaging sizes range from 3.5kg to 70kg. A selection is available here via the eshop.
Contactez-nous ou passez en magasin pour toutes autres quantités plus importantes.
Need more information? Visit the Jesmonite product page
Mixing ratio by weight: 100 g liquid to 250 g powder
Setting time at 18°C: 15 to 20 minutes
Colour: cream
Dry density: 1745 kg/m³.
Dilatation on intake 0.15
Young’s modulus: 5 – 6 Mpa
Fire resistance – Class ‘O
Storage: the base should be kept dry at between 5 and 25°C; containers for liquids should be kept tightly closed to prevent water evaporation and the formation of a skin.
Shelf life: six months from the date shown on the pack.
Easy to use
Solvent-free – no VOCs
Non-toxic
Quick-drying
Fire resistance – Class ‘O
Good abrasion and impact resistance
High compressive and tensile strength
Can be cleaned with water
Pour a small amount of the mixture into the mould and brush all accessible surfaces with jesmonite. If access is difficult, rotate the mould so that the mixture spreads over the entire surface.
Then fill the rest of the mould.
Make sure you pour the mixture in a thin vein.
Lightly tapping the mould can also help the air to escape.
Use a matt sealer to waterproof your creations
Use a gloss varnish to seal your creations
Use a matt varnish to waterproof your creations
Add acrylic pigment
Add a neon pigment
Add metallic powder
To make ultra-resistant panels
To make thick, ultra-resistant castings
If I pour my jesmonite, I need 1750 g of jesmonite (A+B) to fill 1 volume of 1000 ml.
If I laminate my jesmonite, I need 1750g of jesmonite (A+B) per millimetre of thickness and per square metre.
To calculate the quantities and proportions of Jesmonite you’ll need, first select the relevant range. Then specify whether you are calculating on the basis of a mold or a casting. If you’re calculating on a mold basis, place the mold on a scale, fill it with water and enter the quantity in the calculator. If you’re calculating according to a cast part, weigh the part and enter the information into the calculator. This will give you the quantity of liquid and powder needed to make your part.
