Free delivery in Benelux until 10kg.

103 STICK METAL REPAIR (KIT)

Resimetal 103 Metal Repair Stick is a two-component repair material in stick form that hardens rapidly at room temperature after mixing. It’s a metal repair adhesive that develops high mechanical strength in a short space of time. – Application on hand-prepared or mechanically cleaned surfaces. – Fast curing – (dry in 30 min).

 13,00 115,56 HT

Description

103 Metal Repair Stick

A single-component repair putty in stick form that hardens rapidly at room temperature after mixing. It is a metal repair adhesive that develops mechanical strength in a short time and can be used for emergency repairs.

 

    • Leaky pipes

 

    • Pump/valve bodies with holes

 

    • Leaky tank seams

 

    • Pipe flanges

 

 

Surface preparation

Metal substrates – Hand tools

1. All oil and grease must be removed from the surface using a suitable cleaner such as MEK.

2. All surfaces should be cleaned using a wire brush, metal file, coarse sandpaper, etc.

3. Once abraded, the surface must be degreased and cleaned with MEK or a similar product.

Metal substrates – Mechanical tools

1. All oil and grease must be removed from the surface using a suitable cleaner such as MEK.

2. All surfaces must be mechanically abraded using hand grinders to ISO 8501/4 ST3 (SSPC SP3 ST3).

3. Once abraded, the surface must be degreased and cleaned with MEK or a similar product.

4. All surfaces must be coated before ginger or oxidation appears.

Mixing and application

Before mixing, check the following points

1. Ambient and surface temperature above 5°C (41F°).

2. The product is supplied in stick form, so the base and activator components are pre-measured.

3. Simply detach the required amount of material from the stick and knead the product with gloved hands until the black and grey components have reached a medium consistency.

until the black and grey components become a homogeneous medium grey.

4. Once fully mixed, the product has a useful life of 3 to 5 minutes at 20°C (68F°).

5. Once a homogeneous mixture has been obtained, apply the material by pressing the putty onto the prepared surface.

Drying time

At 20°C (68F°), allow applied materials to harden for the times indicated below before subjecting them to the conditions indicated.

These times will be extended at lower temperatures and reduced at higher temperatures:

– Service life 5 mins

– Machining and light loading 30 mins

– Full cure 1 hour

Color

Mixed material – medium grey

Basic component – dark grey

Activator component – Light grey

Conservation

5 years if unopened and stored under normal dry conditions (15-30°C)

Technical data

https://www.resimacsolutions.com/uploads/4/5/0/7/45072315/103_metstick_tds.rv3.08052019.pdf

Product specifications

https://www.resimacsolutions.com/uploads/4/5/0/7/45072315/103_ps.rv3.13052019.pdf

Application guide

https://www.resimacsolutions.com/uploads/4/5/0/7/45072315/103_qag.rv2.10052019.pdf